Page 1 of 1

PostPosted: Thu Jan 06, 2005 12:23 am
by johncohn
Folks...
I'm having trouble addressing the IR port on my Treo 600 from PocketC. I'm using the following code fragment

...
ret = seropenx(0x8001, 9600);
sersend('H');
serclose();
...

Nothing seems to happen. In addition to trying port address
0x80001 I've tried using 0x6972636D - IrComm which the PocketC docs says should work on the newer OMAP based devices (The Treo uses the OMAP processor, I think).. Thsi address hangs the treo requiring a soft reset. Any idea what I need to do ? Any help appreciated..
Thanks !

-jc